Mitsubishi Electric R60AD8-G - Page 158

156
APPX
Appendix 3 Buffer Memory Areas
CH1 Digital output value
The A/D-converted digital output value is stored in 16-bit signed binary value.
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Digital output value
•CH Digital output value (in Q compatible mode)
■Refreshing cycle
If averaging processing is performed, values are updated at every averaging process cycle, but if not performed, values are
updated at every sampling cycle.
CH1 Digital operation value
A digital operation value obtained by the scaling function, shift function, digital clipping function, or difference conversion
function is stored in 16-bit signed binary value.
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Digital operation value
•CH Digital operation value (in Q compatible mode)
When the scaling function, shift function, digital clipping function, or difference conversion function is not used,
a value which is the same as the one in 'CH1 Digital output value' (Un\G400) is stored.
(1) Data section
(2) Sign bit 0: Positive, 1: Negative
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
11 12 13 14 15 16 17 18 
(1) Data section
(2) Sign bit 0: Positive, 1: Negative
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
402 602 802 1002 1202 1402 1602 1802 2002 2202 2402 2602 2802 3002 3202 3402
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
54 55 56 57 58 59 60 61 
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b0b1b2b3b4
(1)(2)
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b0b1b2b3b4
(1)(2)