APPX
Appendix 3 Buffer Memory Areas
157
A
CH1 Maximum value
The maximum value of the digital operation value is stored in 16-bit signed binary value.
In the following cases, 'CH1 Maximum value' (Un\G404) is updated with the current value.
• When 'Operating condition setting request' (Y9) is turned on and off and the setting is changed
• When 'Maximum value/minimum value reset request' (YD) is turned on and off
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Maximum value
•CH Maximum value (in Q compatible mode)
CH1 Minimum value
The minimum value of the digital operation value is stored in 16-bit signed binary value.
In the following cases, 'CH1 Minimum value' (Un\G406) is updated with the current value.
• When 'Operating condition setting request' (Y9) is turned on and off and the setting is changed
• When 'Maximum value/minimum value reset request' (YD) is turned on and off
■Buffer memory address
The following shows the buffer memory address of this area.
•CH Minimum value
•CH Minimum value (in Q compatible mode)
• For the channel to which the averaging processing is specified, the maximum and minimum values are
stored at every averaging processing time.
• When the scaling function, shift function, digital clipping function, or difference conversion function is used,
values calculated by each function are stored in Maximum value and Minimum value.
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
404 604 804 1004 1204 1404 1604 1804 2004 2204 2404 2604 2804 3004 3204 3404
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
30 32 34 36 38 40 42 44
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
406 606 806 1006 1206 1406 1606 1806 2006 2206 2406 2606 2806 3006 3206 3406
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
31 33 35 37 39 41 43 45
To Next Page
Loading...
