Mitsubishi CR751-D - Controller Installation Procedures; Unpacking Procedures; Transportation Guidelines

2Unpacking to installation
Installation 2-7
2.2 Installation
2.2.1 Unpacking procedures
The controller is shipped from the factory packaged in cardboard.
2.2.2 Transportation procedures
The following shows how to transport the controller.
Fig. 2-1 ： Transporting the controller
1) Slightly tilt the controller and put your hands underneath. Providing steady support with both hands, lift it up
and transport.
Be careful not to trap fingers when transporting the controller.




Mass:
Approx. 16kg
CR750 controller CR751 controller
Mass:
Approx. 12kg