6 - 11 6 - 11
MELSEC-Q
6 UTILITY PACKAGE (GX Configurator-PT)
6.4 Initial setting
[Purpose of operation]
Make initial setting axis-by-axis for the QD70 to operate. The following items are
data that need initial setting.
• Parameters
• OPR data
• Positioning data
This initial setting makes sequence program setting unnecessary.
For more information on the setting details, refer to "CHAPTER 4 DATA USED
FOR POSITIONING CONTROL".
[Startup procedure]
"Start I/O No." "Package name" "Module model name" Initial setting
[Setting screen]
<Initial setting of parameters and OPR data>
Move to sub window
Axis #1 Parameter Setting Axis #1 OPR Data Setting
Select items to be moved
to sub window.
To Next Page
Loading...