12 - 3 12 - 3
MELSEC-Q
12 COMMON FUNCTIONS
[H/W SW Information]
The setting states of the intelligent function module switches are displayed.
Item Signal name Corresponding switch Value
PLS MODE Pulse output mode Switch 1
PLS OUT Pulse output logic selection 8 lower bits
DCC CLR Deviation counter clear output signal logic selection
Switch 2
8 upper bits
ZERO SIG Zero signal input logic selection 8 lower bits
ROT DIR Rotation direction setting
Switch 3
8 upper bits
DOG SIG Near-point dog signal input logic selection Switch 4
NOP – Switch 5
Refer to "Section 5.6 Switch
setting for intelligent function
module" for details.
To Next Page
Loading...