Index - 2 Index - 2
[I]
I/O assignment setting .................................. 5-14
Immediate stop............................................... 9- 6
Incremental system........................................ 9- 8
Initial setting................................................... 6-11
Initial setting program.................................... 7-12
Input/output interface internal circuit............. 3-11
Input/output interface specifications .............. 3- 7
Installing and uninstalling............................... 6- 2
Intelligent function module parameters ......... 6- 5
Internal circuit ................................................ 3-11
Internal current consumption ......................... 3- 1
[J]
JOG data list.................................................. 4-20
JOG operation .............................................. 10- 1
JOG operation program ................................ 7-10
JOG operation starting timing chart............. 10- 1
JOG start signal.............................................. 3- 4
JOG. 1
JOG speed ....................................... 4- 5
JOG. 2
JOG ACC time.................................. 4- 5
JOG. 3
JOG DEC time.................................. 4- 5
JOG. 4
JOG direction flag............................. 4- 5
[L]
LED display function ................................... 13-13
List of OPR data............................................ 4-14
List of buffer memory addresses ..............App-16
List of control data......................................... 4-30
List of devices................................................. 7- 3
List of errors.................................................. 13- 3
List of functions............................................... 3- 2
List of input/output signals.............................. 3- 4
List of monitor data........................................ 4-27
List of parameters........................................... 4- 9
List of positioning data .................................. 4-21
List of warnings............................................ 13-11
[M]
MELSECNET/H.............................................. 2- 3
Machine OPR control..................................... 8- 2
Machine OPR control starting timing chart... 7-15
Max. connection distance .............................. 3- 1
Max. output pulse........................................... 3- 1
Maximum number of modules ....................... 2- 3
Md. 1
Current feed value............................... 4- 7
Md. 2
Movement amount after near-point dog ON
........................................................................ 4- 7
Md. 3
Current speed ......................................4- 7
Md. 4
Axis operation status ...........................4- 7
Md. 5
Axis error code.....................................4- 7
Md. 6
Axis warning code................................4- 7
Md. 7
Status ...................................................4- 7
Md. 8
External I/O signal................................4- 7
Md. 9
Executing positioning data No. ...........4- 7
Md. 10
Error status........................................4- 7
Md. 11
Warning status...................................4- 7
Mechanism of positioning control...................1- 2
Module READY signal....................................3- 5
Module information monitor data...................4-27
Module's detailed information........................5-17
Monitor/test.....................................................6-15
Movement amount per pulse..........................1- 3
Multiple PLC system.......................................2- 3
Multiple axes simultaneous start control.......9-17
[N]
Near-point dog method machine OPR
control..............................................................8- 4
Near-point dog signal......................................3- 7
No. of control axes..........................................3- 1
No. of occupied I/O points ..............................3- 1
[O]
OPR complete flag.........................................4-28
OPR data setting program..............................7- 8
OPR method ...................................................8- 3
OPR method (1): Near-point dog method......8- 4
OPR method (2): Stopper 1............................8- 6
OPR method (3): Stopper 2............................8- 8
OPR method (4): Stopper 3...........................8-10
OPR method (5): Count 1..............................8-12
OPR method (6): Count 2..............................8-14
OPR request ...................................................8- 1
OPR request OFF program............................7- 9
OPR request flag ...........................................4-28
OPR. 1
OPR method.....................................4- 4
OPR. 2
OPR direction....................................4- 4
OPR. 3
OP address.......................................4- 4
OPR. 4
OPR speed ........................................4- 4
OPR. 5
Creep speed .....................................4- 4
OPR. 6
ACC/DEC time at OPR.....................4- 4
OPR. 7
DEC/STOP time at OPR ..................4- 4
OPR. 8
Setting for the movement amount after
near-point dog ON ..........................................4- 4
OPR. 9
OPR dwell time.................................4- 4
Ind
To Next Page
Loading...