IPB-5000A
2. Features
2-1
2. Features
Has a welding current monitoring function for the judgment of weld quality
The selection from four control methods of Constant-current control, Constant-voltage
control, constant-current/constant-voltage combination control and constant-power
control is applicable for realizing the stable weld quality
Has an interrupting function (INTERRUPT) to interrupt fusing current by externally
inputting the displacement of an electrode, etc. for stable fusing
Weld current can be stopped when the displacement reaches the set value, because
the displacement change between electrodes generated by fusion penetration etc. is
measured (only for the model with a displacement sensor).
As an inverter is used, the power factor is high and the power condition is stabilized
Because of the menu selection system, setting of various items can easily be done
With four protective functions, the operator can work at ease
・Overcurrent detecting function
・No-current / no-voltage detecting function
・Thermostat fault detecting function
・Self diagnostics
The Miyachi IPB-5000A is an inverter-type power supply designed for spot
welding and fusing.
It is easy to move and install, as it is small in size and compact. In addition, the monitor
function is provided which makes possible the judgment of defective or non-defective
welding.
To Next Page
Loading...
