EasyManua.ls Logo

Mobotix M24M - Using a Microsd Card in a Diferent MOBOTIX Camera; Limitations on Warranty When Using Flash Storage Devices

Mobotix M24M
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...



www.mobotix.com • sales@mobotix.com
Caution
A 
 to MicroSD Card and . Failing to do so may lead
to data loss!
Removing connected flash storage devices from the camera without properly deactivating
them may lead to data loss and/or destroy certain areas of the storage device. Due
to MxFFS formatting, this is limited to 4MB of lost data per incident.

A MicroSD card containing recorded video data from a MOBOTIX camera can be inserted
into any MicroSD card-enabled MOBOTIX camera. Once MicroSD card recording has been
activated (requires a reboot), the "new" MOBOTIX camera automatically synchronizes with the
card and resumes recording. No data is lost in this process. Make sure that you deactivate
MicroSD card recording before removing the card and reboot the MOBOTIX camera!
If the MicroSD card's contents are encrypted, you need to enter the correct password in
the "new" camera in the 
dialog. Otherwise, the camera cannot access the MicroSD card.

MOBOTIX will not assume any responsibility for flash storage devices (for example, MicroSD
cards or connected USB storage devices) delivered with or integrated into MOBOTIX cameras.
The same applies to damage to flash storage devices or damage resulting from the use
of devices that are not supplied by MOBOTIX.

Table of Contents

Related product manuals