www.mobotix.com • sales@mobotix.com
The M24M is an allround camera designed for use in indoor and outdoor applications. The
camera is always installed together with the VarioFlex mount, which has been prepared at
the factory for wall mounting and can be converted to a ceiling mount in just a few steps.
The best camera position for the selected lens must be found before mounting the camera
to a ceiling, or to an overhang or balcony (see Sections 1.2 and 1.5). Once the camera has
been mounted to the wall, you can fine-tune its position.
.
Using the VarioFlex Ceiling Mount, the camera can be precisely panned, both
, to suit the area that is to be monitored.
as follows:
• horizontally: 360°
• vertically: 110°
See Section 3.9.1
To Next Page
Loading...
