www.mobotix.com • sales@mobotix.com
The virtual PTZ function allows you to use a mouse or joystick to continuously zoom in on
images from the selected video source and "virtually" move the enlarged image
section within the entire image sensor area (see also Section 1.1).
The vPTZ function of the M24M can be controlled in the browser using the mouse. By
clicking any position on the image displayed on the monitor, this position becomes the
new image center. The image moves and is corrected accordingly. The can
be used to control the zoom function. This functionality is disabled in the default settings
of the camera and must therefore first be activated. To do so, go to
and uncheck the item. Then save the settings by
clicking Set and Close. You can now use the scroll wheel to or
.
USB joystick offers
greater ease of use
To Next Page
Loading...
