EasyManua.ls Logo

Mobotix M24M - 2.1.5 Network Connection And Power Supply

Mobotix M24M
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...



www.mobotix.com • sales@mobotix.com


All M24M models are supplied with power using the PoE standard. The PoE Adapter Set
(MX-NPA-PoE Set) may be used for smaller installations. For larger installations, it is worth
investing in a PoE-capable supply device available on the market. 

.
Caution
The  of the network cable for power supply over an Ethernet cable
is
.
 such as the NPA Set, Power Box,
and Power Rack (MX-NPA-Set, MX-NPR-4, and MX-NPR8/20) are
not suitable for
use with the M24M.
Note
The MOBOTIX M24M can be powered by switches or routers that support the PoE
(Power-over-Ethernet) standard and conform to IEEE 802.3af.

Advantages of centralized backup power supply are available via network
Lower, more cost-eective power consumption
Camera does not require an additional network connection
The PoE adapter replaces
the crossover cable
when directly connect-
ing to a computer
The M24M sup-
ports the Power over
Ethernet standard
IEEE 802.3af (PoE)
For the M24M, you
should use the new
blue MX-NPA-PoE-Set
- previous MOBOTIX
network power acces-
sories such as the NPA
Set, Power Box and
Power Rack (MX-NPA-
Set, MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the M24M



CAMERA

Table of Contents

Related product manuals