www.mobotix.com • sales@mobotix.com
•
You can modify the camera configuration in the Administration
menu or the Setup menu.
• Admin Menu: This menu contains the basic configuration dialogs of the camera
(for example, passwords, interfaces, software updates).
• This menu contains the dialogs for configuring the image, event,
and recording parameters. Some of these settings can be changed using the
corresponding Quick Controls in the live screen.
• If you would like to reset some larger changes in one dialog
without resetting the complete configuration, you can use the button at the
bottom of the dialog to reset only this dialog's settings to the factory defaults. If you
would like to reset all image settings, you can do so using the
Quick Control in the live image of the camera.
• Storing changes permanently: Once you have finished configuring the camera, you
should always store the settings in the camera's permanent memory. You can do so
in each dialog (clicking on the Set button at the bottom of each dialog will temporarily
implement the change; when you click Close, you will be asked to store the complete
configuration in the camera's permanent memory) or in the Admin Menu (Admin
). The section of
the Administration menu provides more functions for storing, copying, and managing
camera settings. For more information on this topic, see Chapter5
Basic Camera
Configuration
in the
Camera Software Manual Part 2
.
• Time tasks and time synchronization: Apart from a multitude of possibilities for
controlling the camera using time (time tables, holidays and vacations, scheduled
tasks, etc.), the camera can also synchronize its internal clock. This allows you to
manually synchronize the camera with a computer or automatically using a time
server or another MOBOTIX camera. The camera can use either NTP time servers or
Time Protocol servers. For additional information, see Section 5.4.2
Date and Time/
Time Zones and Time Servers
in the
Camera Software Manual Part 2
.
•
The "More" and "Less" buttons: When opening some of the camera dialogs, the camera
only shows the most important parameters. These dialogs have a More button in
the bottom right-hand corner; click it to display additional options. If all options are
displayed, click on the button to hide the additional options.
More: Display
advanced features
Less: Hide advanced
features
Automatic time syn-
chronization using
a time server
Make sure to perma-
nently store changed
parameters!
User Name:
admin
Password:
meinsm
To Next Page
Loading...
