www.mobotix.com • sales@mobotix.com
2.4
The M24M is an allround camera designed for use in indoor and outdoor applications.
The camera must always be installed with the VarioFlex mount, which has been prepared
at the factory for wall mounting and allows the cabling to be concealed. The best camera
position for the selected lens must be found before mounting the camera to the wall (see
Sections 1.2 and 1.5). Once the camera has been mounted to the wall, you can fine-tune
its position.
.
2.4.2
Using the VarioFlex Wall Mount, the camera can be precisely panned, both
, to suit the area that is to be monitored.
as follows:
• horizontally: 180°
• vertically: 110°
See Section 3.9.1
To Next Page
Loading...
