www.mobotix.com • sales@mobotix.com
The M24M can be mounted to the wall of a building or structures, even mobile surfaces,
for both indoor and outdoor use. The camera is mounted using the pre-installed
, which is easily secured using the four enclosed screws
and screw anchors (depending on the surface, it can also be mounted without screw
anchors directly over the flush-mounted socket). The Ethernet connection cable of the
camera has already been guided through the mount and simply needs to be connected
with the network cable. By adjusting the VarioFlex mount as required, the captured image
area can be precisely adjusted to the desired practical application.
By exchanging the wall mount for the separately supplied ceiling mount, the M24M is ready
to be thanks to the VarioFlex system. This mounting
option is of particular benefit when monitoring rectangular rooms with a single camera. In
such cases, the Super Wide Angle lens (90°, L22) allows the room to be monitored almost
entirely by an M24M mounted to the ceiling in one of the corners. Using the PTZ software, you
can easily zoom in on image details in either the live image or the recording.
.
To Next Page
Loading...
