www.mobotix.com • sales@mobotix.com
(MX-OPT-CBL-LAN)
The Ethernet patch cables for the M24M were devel-
oped by MOBOTIX and have a specially integrated
seal. Every M24M is supplied with a 0.5m long patch
cable as standard. Patch cables of 1m, 2m, 5m,
and 10m in length can also be ordered on request.
(MX-MH-SecureFlex-ESWS)
If you are intending to mount the camera to a pole,
you should consider using the MOBOTIX Pole Mount
for M24M cameras. This mount is made of 3mm
powder-coated stainless steel (white) and has been
designed specifically for outdoor use. The supplied
stainless steel straps allow the mount to be attached
to poles with diameters between 60mm and 180mm
(2.4in to 7.1in). By design, the pole mount does not
allow the use of a flush-mounted wall outlet.
- Available In 2010
CamIO is an extension module for MOBOTIX cameras
that provides numerous connectors for external devices
and expands the scope of the camera to include
various control and switching features.
The CamIO Box (MX-CAM-IO), which is still available
for M12/M22 cameras, is no longer compatible with
the M24M due to the modified system platform.
A new CamIO especially revised for this camera
series is currently in the planning stages and will
be available in 2010.
CamIO for M24M will
be available in 2010
To Next Page
Loading...
