www.mobotix.com • sales@mobotix.com
Please first check that all the components supplied with the Corner and Pole Mount Set
are present in the original packaging.
Item
1.1 1 Pole Mount
1.2 4 Stainless steel hex head screws M6x20mm
1.3 4 Stainless steel hex head screws M6x35mm (not required)
1.4 8 Stainless steel washers
1.5 4 Stainless steel hex nuts M6
1.6 2 Stainless steel straps
• Screwdriver
• Materials and any tools needed to connect the pre-
installed MOBOTIX network cable in the camera with
the on-site network cable.
To Next Page
Loading...
