Mocet M62 - Call Forward; Call Blocking (Add, Edit, or Delete a Number)

- 34 -
1. Press the Menu key on LCD.
 Call Setting
2. Use the navigation key to select the Phone
Setting item and press OK key.
 Call Forward
3. Use the navigation key to select the Call
Forward item and press the OK key to validate
the selection. Select the next item according to
the type of call forward (Always Forward, Busy
Forward, No Answer Forward, DND Forward or
Forking Forward) you would like to activate.
 Status
4. Choose the Status item to turn On/Off the call
forwarding feature. Select On or Off then press
the OK key to validate.
 FWD Number
5. Select the FWD Number item to input the
phone number you wish to forward the calls to.
 No Answer
Forward
6. For No Answer Forward item, there is one
additional item “No Answer Time” for user to
set. If the phone doesn’t answer the call after
this time, the call will be forwarded to the
destination. (Default value is 20 seconds)
Call Forward
Note: It is possible to activate different kinds of call forward at the
same time. Ex: No Answer forward + Busy Forward, etc.
1. Press the Menu key on LCD.
 Admin
Setting
2. Use the navigation key to select the Admin
Setting item. Press OK key to validate the
selection. Type the administrator’s password to
get into Admin menu.
Call Blocking
(Add, Edit, or
Delete a
Number)
 Call Blocking
3. Use the navigation key to select the Call
Blocking item to enter the Caller Blocking List
menu. The LCD screen prompts you to enter a
number between 0 and 9.