M62 Professional IP Deskphone Administrator’s Manual
- 60 -
5. Web Configuration
Login page
The default network settings are the following:
Default IP address: 192.168.1.10
Default Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Default DNS: 8.8.8.8
Default Administrator’s Username of Web: admin
Default Administrator’s Password of Web: 1234
Default User’s Username of Web: user
Default User’s Password of Web: 1111
There are two modes to access the IP phone’s webpage: Administrator and User mode.
Here lists several differences between two modes:
1. There is no Network page for user mode.
2. There is no SW upgrade page for user mode.
3. For user mode, most of SIP settings are hidden.
4. In System page of user mode, user’s password and time settings are kept for user to
set.
Accessing the phone through web browser, just simply enter the “http://phone-ip” in the
location field of the browser. If you are not sure about the IP address of the phone, you can
examine the current IP address through phone’s menu. (Press Menu key, select item “5.
Info”, use navigation key to check the IP address)
To Next Page
Loading...