Mocet M62 - Admin Setting; Admin;User Name, Password

M62 Professional IP Deskphone Administrator’s Manual
- 52 -
Admin Setting
You will need to enter administrator’s password to set the administrator’s account, network,
QoS, dial timeout, language and reset to default.
The default network settings are the following:
Default IP address: 192.168.1.10
Default Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Default DNS: 8.8.8.8
Default Administrator’s Username of Web: admin
Default Administrator’s Password of Web: 1234
There are 5 functions for setting:
 Account Setting
 Networking Setting
 Voice Setting
 Dial Timeout
 Reset to Default
If you need to change these default settings, please refer to the following instructions.
Operation Description
1. Press the Menu key on LCD.
 Admin Setting
2. Use the navigation key to select the Admin
Setting item. Press OK key to validate the
selection. Type the administrator’s
password to get into Admin menu.
 Account Setting
3. Use the navigation key to select the
Account setting item. Press OK key to
validate the selection. The LCD displays
the Account Setting menu.
 Admin/User
4. Select the Admin/User item and press OK
key.
Admin/User
Name, Password
5. Use the navigation key to choose Name
type and press OK key to validate.