12 User Guide EN Dansensor® MAP Check 3 Vacuum
P/N 320598-G
11/2019
“Stand-Alone” or “Black-Box”
The “Stand-Alone” devices features a 5” colour touch screen from which device settings are
made and measuring results are continuously displayed.
The “Black-Box” version without user interface is especially designed for cost effective
automated machine control. The “Black-Box” version can only be controlled from the
packaging machine or a connected PC.
Fig. 1. Dansensor® MAP Check 3 Vacuum “Black-Box” and “Stand-Alone” devices
Sensors
The devices can be fitted with both an O
2
sensor and a CO
2
sensor or an O
2
sensor only.
Mixer control
In combination with the Dansensor® MAP Mix Provectus gas mixer the device can fill a
buffer tank by letting
Dansensor® MAP Check 3 Vacuum control the mixer. See "Mixer
Control" on page 30 for details.
To Next Page
Loading...
