Mocon AMETEK Dansensor MAP Check 3 Vacuum - Power Connector; I;O Cable

24 User Guide EN Dansensor® MAP Check 3 Vacuum
P/N 320598-G
11/2019
Power connector
The device’s power connector should have the following pin connections:
I/O Cable
The 25-pole communication cable between the “I/O CONTROL” connector and the
appropriate port on the packaging machine has the following pin connections:
Pins/Colours/
Function
Description
1 - White
2 - Brown
"GAS"
Gassing signal from packaging machine.
Signal levels: 10 - 32 VDC bipolar. Load: max. 10mA
Must be activated during gassing in die.
3 - Green
4 - Yellow
"EVAC"
Evacuation signal from packaging machine.
Signal levels: 10 - 32 VDC bipolar. Load: max. 10mA
Must be activated during evacuation of die.
N
Not in use
L
AC Power DC Power
GND
13
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
14
1