Mocon AMETEK Dansensor MAP Check 3 Vacuum - Selecting a product for measuring

36 User Guide EN Dansensor® MAP Check 3 Vacuum
P/N 320598-G
11/2019
Selecting a product for measuring
"Black Box" models
Products are selected via the packaging machine’s control software.
Display models
A product is selected from the Products list as described below:
1. From the measuring screen press the Product key to bring up the Products screen.
This screen holds a list of all products with the most recently used product at the top.
Blue text indicates that measurements have been stored for the product.
Yellow text indicates that product settings are not compatible with the current device
configurations.
2. Use scroll keys and to locate the appropriate product then press product to select it
and return to the measuring screen.
If you have a very long list of products you can locate the product by pressing the Find
key. This will bring up the Find products screen.
3. Select the appropriate product search method.
4. Selecting one of the All products.... methods brings up a list of all the products sorted in
the order as selected (ex. Number order)
.
5. Use scroll keys and to locate the appropriate product then press product to select it
and return to the measuring screen.
Product
s
All products: 103
25 :
99 :
47 :
7 :
1 :
Meat Mix 1000gr.
Cheese
Meat 400gr.
Meat Mix 400gr.
Sausages 100 gr.
Find p s
roduct
Total no. of products: 103
All products. Name order
All products. Number order
All products. Last used order
Product number
Product name
Product
s
All products: 103
1 :
7 :
:25
47 :
:99
Sausages 100 gr.
Meat Mix 400gr.
Meat Mix 1000gr.
Meat 400gr.
Cheese