Mocon AMETEK Dansensor MAP Check 3 Vacuum - Test modes in Diagnostics; Test measuring - Cal inlet

46 User Guide EN Dansensor® MAP Check 3 Vacuum
P/N 320598-G
11/2019
Replacing buffer gas filter
(“Buffer”versions only)
 Disconnect the gas inlet hose  from the push-in fitting .
 Unscrew the push-in fitting .
 Replace the filter .
 Connect fitting  and hose  again.
Replacing air inlet filter
 Unscrew the filter  and replace it with a new.
 Remember to fit the gasket .
1
2
3
1
2