38 User Guide EN Dansensor® MAP Check 3 Vacuum
P/N 320598-G
11/2019
Errors/Warnings
Error/Warning messages
In case a device error or warning occurs, a pop-up window appears on the display.
The window shows the type (error or warning), the error/warning number and a brief
description of the error/warning.
To acknowledge the error/warning and close the window either press the Close button or the
X button in the upper right corner.
The error/warning number may be reported to a Service Technician to correct any errors.
See the complete "Error/Warning list" on page 39.
A list of the most recent errors/warnings is available from the Diagnostics menu - see
"Diagnostics menu" on page 59 for details.
“Black Box“ models
In case of an error/warning the indicator lamp on the device front changes to red (error =
steady, warning = flashing) and an error signal is sent to the packaging machine.
A description of the error/warning can only be displayed on the packaging machine’s display
if the packaging machine has been prepared with the necessary communication software.
Warning 8
Error adding product - product with this
name already exists
Close
To Next Page
Loading...
