Mocon AMETEK Dansensor MAP Check 3 Vacuum - Formats;Units;Time

Dansensor® MAP Check 3 Vacuum EN User Guide 69
P/N 320598-G
11/2019
Formats/Units/Time
Selecting Format/Units/Time from the General setup menu will display a screen showing
the various setup parameters for output formats and units.
Time Setting of current time (hh:mm)
Date Setting of current date (using “Date format”)
Date format Setting of date format (DD/MM/YY or MM/DD/YY)
"Time", "Date" and "Date format" are related to the real time clock
setting in the device.

The settings will have effect in all displays showing time and date.
Time format Setting of time format (12h or 24h)
Flow unit Setting of gas flow read-out unit (l/min or SCFH)
Pressure unit Setting of gas pressure read-out unit (bar or psi)
Temperature unit Setting of temperature read-out unit (°C or °F)
Decimal separator Selects whether decimal values are entered using “.” or “,” as decimal
point.
Keyboard layout Select the available country specific keys for a connected keyboard.