Dansensor® MAP Check 3 Vacuum EN User Guide 83
P/N 320598-G
11/2019
7. Technical Information
Technical specifications
Electrical connections
Mains 100-264 VAC, 47-63 Hz
DC models 24V DC available, range 19-36V DC input
Power consumption 25 - 50 W (depending on model)
Mechanical data
Analyser size 192 x 230 x 375 mm (H x W x D)
Analyser weight 8.5 - 9.5 kg (depending on model)
Box of one analyser 379 x 357 x 523 mm (H x W x D)
Boxed weight 10.5 to 11.5 kg (depending on model)
IP classification IP 21 (an IP 45 kit is available as an option)
Connectivity
Network/LAN Ethernet 10/100 mbit/s Base-T with DHCP client or fixed IP
RS232 2 x D-SUB 9 DTE interface (male connector)
USB 1 or 2 x Host, USB 2.0 Connector type A, max. current 250mA
Machine I/O D-SUB 25 male, cable supplied
To Next Page
Loading...