Mocon AMETEK Dansensor MAP Check 3 Vacuum - Page 69

Dansensor® MAP Check 3 Vacuum EN User Guide 67
P/N 320598-G
11/2019
Each parameter separated by ‘;’.
A new line is inserted for each measurement.
Buffer CO2 Float 0.00
Buffer CO2 alarm state Text "Inactive", "High", "Low ""-"
Buffer CO2 warning state Text "Inactive", "High", "Low ""-"
Buffer CO2 alarm limit low Float 0.00
Buffer CO2 alarm limit high Float 0.00
Buffer CO2 warning limit low Float 0.00
Buffer CO2 warning limit high Float 0.00
Buffer pressure Float 0.00
Buffer pressure alarm state Text "Inactive", "High", "Low ""-"
Buffer pressure warning state Text "Inactive", "High", "Low ""-"
Buffer pressure alarm limit low Float 0.00
Buffer pressure alarm limit high Float 0.00
Buffer pressure warning limit low Float 0.00
Buffer pressure warning limit high Float 0.00
Mixer mode Text "Off", "On ""-"
O2 mixer Float 0.0
CO2 mixer Float 0.0
N2 mixer Float 0.0
AUX mixer Float 0.0
Mixer pressure out Float 0.0
Ambient pressure measurement Float 0.0
Device temperature Float 0.0
Error state Int 0 <error code>
Parameter Type Value
Unavailable/
Error value