Moneris Core Wireless Move/5000 - Locking and Unlocking the Screen; Procedure to Lock Screen; Procedure to Unlock Screen

Moneris Core® Move/5000: Using Your Terminal 10
Locking the screen
In order to prevent unauthorized use, Moneris recommends locking the terminal screen when:
 your terminal is unattended, for example, when you are away from the cash register area;
 your business is closed. Leave the terminal powered on and lock the screen.
To lock the screen:
1. Think of a lock code you will remember (using 4 to 10 digits).
 You cannot use 3 or more consecutive numbers (such as 1236) or 3 or more repeating numbers (such as
11125).
2. On the Main menu, tap Screen Lock.
The “Please enter a temporary lock code for this device” prompt appears.
3. Enter the lock code you determined in step 1, then tap OK.
The screen is locked.
To unlock the screen:
 enter the same lock code you used to lock the screen, or
 enter your user ID and passcode.