Moneris Core Wireless Move/5000 - Powering Off the Terminal; Terminal Power Off Procedures

Moneris Core® Move/5000: Using Your Terminal 13
Power off
1. Ensure that the terminal is not connected to a power source.
2. Go to the Main Menu using one of these methods:
 Tap the Main Menu icon on the screen (if it is available).
 Press the Menu key on the keypad.
1. On the Main Menu, tap Power Off.
The “This will power off this terminal.” message appears.
2. Tap OK or press the green key.
The terminal powers off.
Note: It is also possible to power off the terminal using a keypad combination. Press and hold down the
punctuation key, then press the yellow key. The terminal will power off.