Moneris Core Wireless Move/5000 - Terminal Settings Reports; Basic and Enhanced Terminal Reports

Moneris Core® Move/5000: Using Your Terminal 34
Terminal totals report
Generate this report to see transaction totals for the current batch or for a specific date. The totals are broken
down by card brand with a grand total at the end.
Note: Transaction totals are cleared when your batch is closed. If you need the transaction totals report, be
sure to print it before batch close.
1. On the Main menu, tap Reports > Transaction Reports > Terminal Totals.
 Respond to any security prompts (refer to page 9) that appear.
The Terminal Totals search screen appears.
2. Tap the Select Type field to display the drop-down list, then tap the type of search you wish to perform.
 By date: Tap Date to see totals for a specific date.
 To enter or change the date, tap the date field, key in a new date using the terminal keypad, then
tap OK.
 By batch: Tap Entire Batch to see totals for the current batch.
3. Tap OK to generate the report.
4. The terminal displays the report on screen.
 If the report extends past the screen, swipe up to see more.
 If no totals or transactions are displayed, there were no transactions approved on the date specified or
the current batch may be empty.
 To print the report, tap Print, or press 1 on the terminal keypad.
 To change the type of search, tap Back.
 To clear the screen and return to the Transaction Reports menu, tap OK.
Transaction Details report
Generate this report to see details for all transactions stored on the terminal in the current batch or all
transactions processed on a specific date.
This report also prints the transaction totals at the end of the transaction details. If you wish to see the totals
only, generate the Terminal Totals report (refer to page 34).
1. On the Main menu, tap Reports > Transaction Reports > Transaction Details.
 Respond to any security prompts (refer to page 9) that appear.
The Transaction Details search screen appears.