Specification TWINsync module
4
1 General information
ID no.: CB08759-001Date: 03/2023
moog
1 General information
The KEBA Industrial Automation Germany GmbH documentation set contains the
complete documentation belonging to the respective product series. The
documentation of a product series includes Operation Manual (hardware
description), Device Help (software description) and other User manuals (e.g.
fieldbus description) and Specifications. They are available in PDF format.
1.1 Target group
Dear user,
the documentation is an integral part of the device and contains important
information on operation and service. It is aimed at everyone who performs
mounting, set-up, commissioning and service tasks on the product.
1.2 Requirements
Requirements for using KEBA Industrial Automation Germany GmbH devices:
l The documentation for the devices must be legible, accessible at all times
and kept for the product’s entire service life.
l Read and understand the documentation for your device.
l Qualification: To avoid bodily injury and property damage, only qualified
personnel with electrical training may work with/on the device.
l Required skills and knowledge:
- national accident prevention rules (e.g. DGUV V3 in Germany)
- How to set up, install, commission and operate the device
Work related to other specialised areas, such as transportation, storage and
disposal must be performed exclusively by appropriately trained personnel.
To Next Page
Loading...
