17
ع How to set the eject tray
Install or replace the eject tray as shown next to match the cutting job.
Cutting job & eject tray combination Installation
Eject tray (standard accessory) + business card divider
• Use when cutting to a business card sizes with trim margin.
Eject tray (standard accessory) + business card divider
+ business card guide plate
• Use when cutting to a business card sizes without trim margin.
Eject tray (standard accessory) + postcard guide plate
• Use when cutting postcard sizes.
OT-2(option)
Use when cutting the following sizes.
• Cutting A3/A4 sizes.
• Cutting double-size business cards.
• Cutting double Japanese postcards.
To Next Page
Loading...
