31
1. CUTTING CONDITIONS AND MAK ING SET TINGS
This manual explains in detail how to set rotary blade cutting conditions.
All operation is performed with switches on the control panel.
ع STANDBY MODE DISPLAY for rotary blade & CUTTING CON DI TIONS (set-
ting information)
All cutting/Sheet cut counter
Paper size
Cut sheet counter
Cutting reference position
Sheet thickness
Trim margin/No trim margin
Format No.
for fixed format
Format No.
for free format
Format No. during format
without long blade cut
Display during fixed format
Display during free format
Display during format without long blade cut
Standby mode
To Next Page
Loading...