Motorola LI2208 - Page 334

A - 4 LI2208 Product Reference Guide
Suffix 1 Value
Suffix 2 Value
7013 <CR><LF> 7-23
Scan Data Transmission Format Data as is 7-25
FN1 Substitution Values 7013 <CR><LF> 7-26
Transmit “No Read” Message Disable 7-27
Unsolicited Heartbeat Interval Disable 7-28
Enter Key (Carriage Return/Line Feed) 7-29
Tab Key 7-29
Symbologies
Disable All Code Types N/A
9-6
Enable All Code Types
N/A
9-6
UPC/EAN
UPC-A Enable 9-7
UPC-E Enable 9-7
UPC-E1 Disable 9-8
EAN-8/JAN 8 Enable 9-8
EAN-13/JAN 13 Enable 9-9
Bookland EAN Disable 9-9
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) Ignore 9-11
User-Programmable Supplementals None 9-13
UPC/EAN/JAN Supplemental Redundancy 10 9-13
UPC/EAN/JAN Supplemental AIM ID Format Combined 9-13
Transmit UPC-A Check Digit Enable 9-15
Transmit UPC-E Check Digit Enable 9-15
Transmit UPC-E1 Check Digit Enable 9-16
UPC-A Preamble System Character 9-17
UPC-E Preamble System Character 9-18
UPC-E1 Preamble System Character 9-19
Convert UPC-E to A Disable 9-20
Convert UPC-E1 to A Disable 9-20
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.