Getting Started 1 - 3
1. Slide the microSD card holder down to unlock.
2. Lift the microSD card holder.
Figure 1-2
Card Removal
3. Remove the card from the card holder.
4. Lower the microSD card holder.
5. Slide the microSD card holder up to lock.
Installing the mini-SIM Card
GSM phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain this card
from the your service provider. The card fits into the MC45 and can contain the following information:
•
Mobile phone service provider account details.
•
Information regarding service access and preferences.
•
Contact information, which can be moved to Contacts on the MC45.
•
Any additional services to which you have subscribed.
To install the mini-SIM card:
1. Slide the mini-SIM card holder to the right to unlock.
2. Lift the mini-SIM card holder.
Figure 1-3
Lifting the mini-SIM Card Cover
NOTE The MC45 does not support copying multiple contacts to some SIM cards. If an error message appears,
see Chapter 7, Maintenance and Troubleshooting for more information.
NOTE For more information about SIM cards, refer to the service provider's documentation.
To Next Page
Loading...
Need help?
General
