Motorola MC45 Integrator Guide

Accessories 2 - 3
USB Rapid Charge Cable
Use the USB Rapid Charge cable to connect the MC45 to the power supply for charging or to a host computer
for communication.
Figure 2-1 USB Rapid Charge Cable
Communication with Host Computer
To communicate with a host computer:
1. Ensure ActiveSync is installed and configured on the host computer. See Chapter 3, ActiveSync for more
information.
2. Connect USB Rapid Charge cable to the microUSB port on the side of the MC45.
3. Connect the USB connector of the USB Rapid Charge Cable to the USB Port on the host computer.
4. The USB Connect dialog box appears.
5. Tap ActiveSync RNDIS or ActiveSync Serial.
6. Tap Connect.

Motorola MC45 Specifications

General

Brand	Motorola
Model	MC45
Category	PDA
Language	English