CHAPTER 7 MAINTENANCE AND
TROUBLESHOOTING
Introduction
This chapter includes instructions on cleaning and storing the MC45, and provides troubleshooting solutions
for potential problems during MC45 operation.
Maintaining the MC45
For trouble-free service, observe the following tips when using the MC45:
•
Do not scratch the screen of the MC45. When working with the MC45, use the supplied stylus or
plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or
other sharp object on the surface of the MC45 screen.
•
A screen protector, p/n KT-MC45-SCRNP-10R, is applied to the MC45. Motorola recommends using this
to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen
displays. Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface with tactile feel
• Abrasion and chemical resistance
• Glare reduction
• Keeping the device’s screen looking new
• Quick and easy installation.
•
The touch-sensitive screen of the MC45 is polycarbonate. Do not to drop the MC45 or subject it to strong
impact.
•
Protect the MC45 from temperature extremes. Do not leave it on the dashboard of a car on a hot day,
and keep it away from heat sources.
•
Do not store or use the MC45 in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the MC45. If the surface of the MC45 screen becomes soiled, clean it with
a soft cloth moistened with a diluted window-cleaning solution.
To Next Page
Loading...
Need help?
General
