Accessories 2 - 9
Vehicle Charge Cradle
Installation Reminders
•
Do not mount the Vehicle Charge Cradle where it will obscure the driver’s view of the road.
•
Do not mount the Vehicle Charge Cradle near the driver seat air bag deployment area.
Install the vehicle mount on the surface of the vehicle that is reasonably flat and free of dirt and oil. Clean the
mounting surface with a glass cleaner and a clean cotton cloth. Install the vehicle mount on the windshield or
other flat car surface using the supplied mounting disc.
Windshield Installation
1. Fix the suction cup mount to the selected area with the suction lever facing up.
Figure 2-9
Install on Windshield
2. Flip the lever down to create a vacuum between the suction cup and the mounting surface.
WARNING! Some countries prohibit the mounting of any electronic device in any location on the vehicle
dashboard. Be sure to check with local laws acceptable mounting areas before installing the
auto mounting kit.