Phone Setup 5 - 7
•
To forward incoming calls to a different phone number based on a specific situation, select one or more
of the check boxes under Forward phone calls only if:.
• No answer: enter the phone number to receive forwarded calls only when the phone cannot be
answered. Then select a time period from the Forward after: drop-down list. Options are 5, 10, 15,
20, 25, and 30 seconds.
• Unavailable: enter the phone number to receive forwarded calls only when the phone is turned off or
the user is unreachable.
•Busy: enter the phone number to receive forwarded calls only when the line is busy.
Call Waiting
Call waiting notifies you of an incoming call when the phone is in a phone session. Select the Notify me radio
button to enable call waiting. Select the Do not notify me radio button to disable call waiting.
Voice Mail and Text Messages
To use voice mail and send short messages, enter the voice mail and/or text message phone number in the
appropriate text boxes.
Fixed Dialing
Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area code(s) specified in a Fixed
Dialing list.
1. Select Fixed Dialing and tap Get Settings.
2. Select the Enable fixed dialing check box.
3. To add a number to the list, tap Menu > Add.
4. Enter the phone number or area code to restrict and tap Done.
5. Repeat steps 3 and 4 to add more numbers, and tap Done twice when complete.
6. Enter PIN2 and tap Done.
Internet
Use the Internet tab to configure Internet calling.
Select an option from the drop-down list.
Tap OK.
Services
Use the Services tab to set Broadcast Channels and GPS Privacy features.
NOTE Call Waiting may not be available on all networks. Check with your service provider for availability.
NOTE PIN2 is buffered in the MC45 indefinitely after entry and will not be requested again until a reboot of the
MC45 has been performed. Should PIN2 be required, then the user must perform a reboot of the MC45.
To Next Page
Loading...
Need help?
General
