CHAPTER 5 PHONE SETUP
Introduction
This chapter explains how to verify MC45 service on an Global System for Mobile communications (GSM) /
Universal Mobile Telecommunications System (UMTS) wireless network and establish settings.
GSM/UMTS networks deliver mobile voice and data services, such as Short Message Service (SMS)/Text
Messaging, with full roaming capabilities across the world. High-speed Downlink Packet Access (HSDPA)
enabled networks offer Internet-based content and packet-based data services. This enables services such as
internet browsing, e-mail on the move, powerful visual communications, multimedia messages, and
location-based services.
When using the MC45 as a phone, services can include speed dialing, call tracking, voice mail, call forwarding,
conference calling, and caller ID, depending on the type of service.
Also use the integrated phone as a modem to connect the MC45 to an ISP or work network. The GSM/UMTS
enabled MC45 can connect to the Internet or work network using Cellular Line, or using the modem specified
by the mobile phone service provider.
Automatic Network Setup
See First-time Network Activation on page 1-8 for information on activating the MC45 upon startup.
Manual Network Setup
To manually configure the MC45 for a GSM/UMTS network:
1. Install an active SIM card into the MC45. Refer to Installing the mini-SIM Card on page 1-3.
2. Tap Start > Settings > Connections > Phone Network Setup.
NOTE Before using an MC45 on a wireless network, first select a provider, establish a voice and data-enabled
service plan, and configure the MC45 (where applicable). Refer to the MC45 User Guide for information
on how to use the phone and services.