2 - 18 MC45 Integrator Guide
LED Charge Indications
The Charge LED on the MC45 indicates battery charging status. See Table 1-1 on page 1-7 for charging status
indications.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC45.
To accomplish this, for small periods of time, the MC45 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC45 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See Table 1-1 on page 1-7.
Communication Setup
To connect an MC45 communication/charge cable to a serial or USB device:
1. Connect the USB end of the MC45 communication/charge cable to the communication port of the device.
2. Connect the MC45 connector end of the cable to the MC45. For more information on communication setup
procedures, see Chapter 3, ActiveSync.
To Next Page
Loading...
Need help?
General
