ActiveSync 3 - 3
Figure 3-2
ActiveSync Window
2. In the ActiveSync window, select File > Connection Settings. The Connection Settings window
appears.
Figure 3-3
Connection Settings Window
3. Select the appropriate check box for the type of connection used.
4. Select the Show status icon in Taskbar check box.
5. Select OK to save any changes made.
Synchronization with a Windows
Embedded Handheld 6.5.3
Device
To synchronize with a Windows Embedded Handheld 6.5.3 device:
1. If the Get Connected window does not appear on the host computer, select Start > All Programs >
Microsoft ActiveSync.
NOTE Assign each mobile computer a unique device name. Do not try to synchronize more than one mobile
computer to the same name.
NOTE When a mobile computer with Windows Embedded Handheld 6.5.3 is connected to a host computer and
an ActiveSync connection is made, the WLAN radio (if applicable) is disabled. This is a Microsoft security
feature to prevent connection to two networks at the same time.
To Next Page
Loading...
Need help?
General
