6 - 28 Maintenance
18. Pull back the strain relief of the spiral cord cable by pushing the spiral cord inside towards the
Handset front housing.
Figure 6-34 Spiral Cord Cable Connectors Removal
19. Unplug the two wire to board connectors of the spiral cord cable from the keypad flex.
Figure 6-35 Spiral Cord Cable Removal 1
20. Remove the spiral cord cable from the Handset front housing by pushing the two wire to board
connectors in vertical position out of the Handset front housing. Refer to Figure 6-36.
Figure 6-36 Spiral Cord Cable Removal 2
ZWG0130215-O
Wire to board connectors
Front housing
Strain relief
Pull out strain relief
Push in
spiral cord
ZWG0130215-O
Handset front housing
Unplug these 2 wire to board
connectors
ZWG0130215-O
Make sure that these 2 wire to board
connectors are in vertical position
before pushing out from the Handset
front housing
To Next Page
Loading...
