4.18.3
Enabling Automatic DMO
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→Network Sel→Automatic DMO→Enable/Disable.
NOTE:
You can enable or disable Automatic DMO in the options menu using TMO, DMO, and
Automatic DMO option keys.
Private Calls are not supported when your radio enters Automatic DMO through a
gateway.
This is a Software Selling Feature.
4.18.4
Talkgroup Network Select
This sub-menu item allows you to select one or multiple networks to register your radio accordingly to
the selected talkgroup. TG Net Sel is available when the selected talkgroup is a Any Net talkgroup or a
InterSystem Interface (ISI) talkgroup, otherwise your radio display Service Restricted message.
4.18.4.1
Selecting Your Talkgroup Network
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→TG Net Sel→Home Only.
Your talkgroup registers to the home network.
4.18.4.2
Using Select TG Net Registration
When and where to use: If the talkgroup selected is an Any Net talkgroup, this menu displays multiple
networks allowed for registration. If the talkgroup selected is an ISI talkgroup, this menu displays
multiple talkgroup linked networks. Use this feature to migrate to another predefined network, when
you are out of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→TG Net Sel→Select TG Net.
3 Select the required network from the list.
4.18.4.3
Using Prefer TG Net Registration
When and where to use: If the talkgroup selected is an Any Net talkgroup, this menu displays multiple
networks allowed for registration. If the talkgroup selected is an ISI talkgroup, this menu displays
MN006260A01-AG
Chapter 4 : Main Menu
142
To Next Page
Loading...
Need help?
General
