4.21.5
Setting OPTA Filter
When and where to use: Use this menu item to define which characters are masked when the OPTA
name is displayed.
Procedure:
1 From the home screen, press the Menu key.
2 Select Crypto Menu→OPTA Filter.
3 Highlight check boxes using the Navigation keys and press Select to set which characters are
masked when the OPTA name is displayed.
4 Press Done to confirm the changes.
4.21.6
Starting Crypto Registration
Prerequisites: Ensure that your radio is not in an active call or in Direct Mode Operation (DMO).
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . .→Crypto Menu→Crypto Registr.
3 Select Start Registr to start the registration.
4.21.7
Setting DMO Encryption Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . .→Crypto Menu→DMO Encr Mode.
3 Enable the required mode by selecting one of the following options:
• For crypto mode bit 1, select DMO 1.
• For crypto mode bit 2, select DMO 2.
MN006260A01-AG
Chapter 4 : Main Menu
148
To Next Page
Loading...
Need help?
General
