EasyManuals Logo

Motorola MTP85 0EX Series User Manual

Motorola MTP85 0EX Series
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
5.4
Call-Out
NOTE: This is a Software Selling Feature.
For those who use DMO mode, you are recommended to apply DMO SCK for data
confidentiality.
This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio
interrupts current services and attends to the Call-Out alert without any further delay. After the Call-Out
is cleared by the dispatcher, the radio exits Call-Out mode and reverts to normal mode.
Your radio plays a Call-Out tone according to the configured indication profile. The indication profile
is configured based on the severity level of a matching Group Short Subscriber Identity (GSSI) and
Sub-Address Group Call-Out.
During Call-Out mode, you are only able to receive Emergency calls. However, if your service provider
configures Emergency Calls to be ignored during Call-Out mode, the radio rejects them with no
notification.
If your service provider temporarily blocked the use of PTT in the Call-Out, pressing PTT in the
Call-Out mode is considered an invalid key press until the timer expires.
The time-stamp on the Call-Out alert indicates the time and date when the Call-Out is received.
To read an entire Call-Out message, scroll down the screen by pressing the Down Navigation key. The
length of the message is indicated by the vertical bar on the left of the screen.
Figure 8: Call-Out Message
Call-Out 121
Severity-1
Test Group
Cat on a tree.
Accept Reject
NOTE: Message protection functionality is enabled in the Inbox and Call Out Inbox. Users can
only delete unprotected messages.
5.4.1
Types of Call-Out Alerts
There are five types of the Call-Out alerts:
Normal Call-Out
An alert message that is sent by a dispatcher either to a single radio or to a group of radios. There
are two types of Normal Call-Out:
With user receipt
The radio gets to the Accepted phase when you:
• select Accept, Reject, or Standby.
• the acknowledgment timer runs out.
Without user receipt
The radio gets to the Accepted phase when you:
MN006260A01-AG
Chapter 5 : Features
152

Table of Contents

Other manuals for Motorola MTP85 0EX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola MTP85 0EX Series and is the answer not in the manual?

Motorola MTP85 0EX Series Specifications

General IconGeneral
BrandMotorola
ModelMTP85 0EX Series
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals