2 Select Messages→Send Status.
3 Send status messages by performing one of the following options:
Option Actions
Sending existing status messages
a Select the required status message.
b Perform one of the following actions:
• Press Select.
• Press the PTT button.
• Press the Send key.
Sending new status messages
NOTE: Applicable only for
MTP8550Ex.
a Enter a 5-digit status message number.
b Press Send.
4.3.9.3
Targeted Status Messages
The Targeted Status Messages feature enables sending status messages to addresses that can be
selected by the user.
By default, targeted status messages can be sent to private or talkgroup addresses.
Your service provider can restrict valid addresses to numbers stored in Contacts.
NOTE: This feature is not supported on Dimetra networks.
4.3.9.3.1
Sending Targeted Status Messages
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Perform one of the following actions:
• Highlight the required status message and press the Send key.
• If the status list is empty, enter a 5-digit status message number and press Send.
4 Highlight the required status message and press the Send key.
5 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select the required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
• Status Sent
• Status Failed
4.3.10
Sending an RMS Status
MN006260A01-AG
Chapter 4 : Main Menu
90
To Next Page
Loading...
Need help?
General
