Motorola MTP85 0EX Series User Manual

2 Select [New Contact].
3 Highlight Folder and press Change.
NOTE: If you save a new contact and change the contact folder, the contact is saved
in both All folder and the selected contact folder. If you save the new contact without
change the contact folder, the contact appears in All folder only.
4 Highlight Name and press Change. Enter the name of your contact and press OK.
5 Highlight Type and press Change. Select the required type of your contact.
NOTE:
You can also use the Left and Right Navigation keys to select the type of your contact.
If Private is selected, you can set the hook method for Simplex and Duplex calls (if the
respective Private Call Hook Customization is enabled).
6 Highlight # (number) and press Change. Enter the number of your contact and press Ok.
7 If needed, highlight Speed # and press Change. Enter the speed dial number (1–1000) and
press OK.
NOTE: If the entered number exist, the radio displays Overwrite?. Press Yes to
confirm, or No to enter the speed dial number again.
8 Press Done.
You have created a contact with one number. To add more numbers, repeat steps step 5–step 7.
4.4.2
Editing Contacts
Procedure:
1 From the home screen, press Contacts key.
2 Select the contact you want to edit.
3 Press the Menu key.
4 Press Edit.
5 Select one of the following entries and press Change to edit it:
• Name
• Folder
NOTE:
• When No Folder is selected, the contact is removed from the original folder.
• When changing a contact to a folder where the contact already exists, no changes
are made.
• When changing a contact to a new folder, the contact is added to the new folder
and removed from the previous folder.
• When a folder has reached its maximum capacity, a notification is displayed.
• Type
• # (number)
• Speed #
• Simplex
MN006260A01-AG
Chapter 4 : Main Menu
95

Motorola MTP85 0EX Series Specifications

General

Brand	Motorola
Model	MTP85 0EX Series
Category	Two-Way Radio
Language	English