2-60 Services and Feature Description
6866588D21-D Chapter 2 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
18.13.3.25 Audio Toggle
The “Audio” category is available in the “Set-Up” sub-menu. The “Audio” setting shows the following
three fields: <Audio Profiles>, <Howling Supr> and <Audio Toggle>.
The two options for <Audio Toggle> are “Always Loud” and “Speaker Cntrl”.
18.14 One Touch Keys
It is possible to provision the 2 side programmable buttons to initiate one of the following operations
when the button is pressed for an extended time. The programming is provisioned in the terminal
and is not changeable by the end-user. The functions that are programmable to these buttons are:
• Man Down Enable/Disable
• Text zoom toggle
• Backlight On/off toggle
• TG Scan toggle (Turns on and off talkgroup scanning)
• DMO/TMO toggle (Changes to DMO or TMO mode)
• Enter/Exit TXI Mode
• Send a SDS Status message to a preprogrammed address
• Send an SDS text message to a designated ID
• Start a call to a designated Private ID, Phone number or PABX number
• Select a designated talkgroup
• Audio Profiles
• Howling Suppression
• High/Low audio toggle
• Flip the display
• Screen saver activation
18.15 Test Page / Test Mode
Note: The Test Mode option must be enabled in the terminal via CPS programming and selecting
the “Test Page” option. The Test Mode is only for use by authorized persons, and not by
users.
Use the following terminal key sequence, by pressing each button in turn, to access the Test Mode:
“Left Arrow, Right Arrow, Left Arrow, Menu”.
Note: If the Test Mode option is not enabled via CPS programming you have only access to the KVL
Mode options KVL On or KVL Off.
The following are the services offered by test page:
18.15.1 Version Information
Displays software/hardware version information:
• Build Date
• CodePlug version
• DSP Software version
To Next Page
Loading...
