Motorola MTP850 Ex - 15.19 Covert Mode; 16 Clock System Broadcast Information; 16.1 Time Displayed

3-56 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
Use carefully as this feature, if enabled, will prevent the terminal from operating on any clear
system.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
15.19 Covert Mode
Indicates whether the Covert Mode is On or Off.
To select the option, put the pointer into the field value, click on the arrow, and drag the pointer to
the desired option.
Turn the check box on or off by clicking in the check box.
16 Clock System Broadcast Information
The System Broadcast Information is sent over the air interface to provide the parameters that the
MS needs in order to access the SwMI system.
As a part of the system synchronisation information, TETRA network time information element in an
appropriate PDU is sent to the MS. The MS uses this element for the Time Received & Displayed
feature.
The Time Received & Displayed feature allows to:
• Automatically update time according to the current time zone when in TMO mode or if Dual
Watch is on and use of MS internal clock when in DMO mode or in DMO base mode if Dual
Watch is off or out of service.
• Display time-of-day and date on the MS screen.
• Time-stamp text messages and status received by the MS. The SDS (Short data Services)
feature will include date stamp information the MS received from the network's broadcast of
Time & Date.
16.1 Time Displayed
Defines whether time is displayed to the MS user.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
The setting of this parameter can also be changed via the MS MMI.